KR AGILUS (KR3 R540/ KR4 R600/ KR6 R700-2 & R900-2),
KR IONTEC (KR70 R2100),
KR QUANTEC (KR120 R2700-2)
KR3 R540/ KR4 R600/ KR6 R700-2 & R900-2 AGILUS 負荷重 2~3 kg
KR70 R2100 負荷重 70 kg
KR 120 R2700-2 負荷重 120 kg
最大作用半徑: 541~2701mm
in order to optimize the dynamic performance of the robot With reduced load center distances, higher loads up to the maximum payload may be used.
Main Features:
Maximum reach: 541 mm~2701mm
Maximum payload: 3 kg~120kg
Pose repeatability (ISO 9283): ±0.02 mm~±0.05 mm
Number of axes: 6
Mounting position: Floor/ Ceiling/ Wall/ Desired angle
Footprint: 179 mm*179 mm ~ 754 mm*754 mm
Weight: approx. 26.5 kg~1069kg
Protection rating (IEC 60529): IP40/ IP65/ IP67
Protection rating in-line wrist (IEC 60529): IP40/ IP65/ IP67
KR3 R540
Introduction: The KR 3 R540 is designed for a rated payload of 2 kg in order to optimize the dynamic performance of the robot. With reduced load center distances, higher loads up to the maximum payload may be used.
Main Features:
Maximum reach: 541 mm
Maximum payload: 3 kg
Pose repeatability(ISO 9283): ± 0.02 mm
Number of axes: 6
Mounting position: Floor/ Ceiling/ Wall
Footprint: 179 mm x 179 mm
Weight: approx. 26.5 kg
Protection rating (IEC 60529): IP40
Protection rating in-line wrist (IEC 60529): IP40
Controller: KR C4 compact
KR4 R600
Introduction: Stronger, faster, and more agile. The new KR 4 AGILUS delivers outstanding efficiency and cost-effectiveness in the small robotics segment. With a payload of 4 kg, it combines top performance and maximum reach in an ultra-compact format. For example with cycle times as fast as 0.4 sec in the small Adept cycle, with loads up to 3 kg, in any installation position, at almost any temperature, with utmost precision.
Main Features:
Maximum reach: 600mm
Maximum payload: 4kg
Ultra-short cycle times: as fast as 0.4 seconds
Mounting position: Angle/ Floor/ Ceiling/ Wall
KR6 R700-2/R900-2
Introduction: The KR 6 R700-2/R900-2 is designed for a rated payload of 3 kg in order to optimize the dynamic performance of the robot. With reduced load center distances, higher loads up to the maximum payload may be used.
Main Features:
Maximum reach: 726 mm/ 901 mm
Maximum payload: 6.8 kg/ 6.7 kg
Pose repeatability (ISO 9283): ± 0.02 mm
Number of axes: 6
Mounting position: Floor/ Ceiling/ Wall/ Desired angle
Footprint: 208 mm x 208 mm
Weight approx.: 53 kg/ 55kg
Protection rating (IEC 60529): IP65 / IP67
Protection rating, in-line wrist (IEC 60529): IP65 / IP67
Controller: KR C4 compact
KR70 R2100
Introduction: The KR 70 R2100 is designed for a rated payload of 70 kg in order to optimize the dynamic performance of the robot. With reduced load center distances, higher loads up to the maximum payload may be used.
Main Features:
Maximum reach: 2101 mm
Maximum payload: 85 kg
Rated payload: 70 kg
Pose repeatability (ISO 9283): ± 0.05 mm
Number of axes: 6
Mounting position: Floor/ Ceiling/ Wall/ Desired angle
Footprint: 603 mm x 480 mm
Weight approx.: 530 kg
Protection rating (IEC 60529): IP65
Protection rating, in-line wrist (IEC 60529): IP65 / IP67
Controller: KR C5/ KR C4
KR120 R2700-2
Introduction: The KR 120 R2700-2 is designed for a rated payload of 120 kg in order to optimize the dynamic performance of the robot. With reduced load center distances, higher loads up to the maximum payload may be used.
Main Features:
Maximum reach: 2701 mm
Maximum payload: 167 kg
Rated payload: 120 kg
Pose repeatability (ISO 9283): ± 0.05 mm
Number of axes: 6
Mounting position: Floor
Footprint: 754 mm x 754 mm
Weight approx.: 1069 kg
Protection rating (IEC 60529): IP65
Protection rating, in-line wrist (IEC 60529): IP65 / IP67
Controller: KR C4
#Industrial Automation #Factory Automation